Solar Powered Home Blog

A windmill converts wind power into other types of energy in a three-stage process.  First the wind blows.  Then the wind causes the blades of the windmill to rotate, resulting in mechanical energy.  The mechanical energy causes a shaft to rotate inside an alternator, creating friction which can be converted by an electrical generator to electricity.  At least, that is how wind turbines are currently used.  Of course, for centuries, wind power was used to pump water.

We face innumerable crises today.  An economic crisis causes people to try to save money and live a sustainable life-style wherever they can; an environmental crisis propels individuals to look into ways to generate electricity that don’t cause environmental harm; and geo-political circumstances cause forward-looking people to seek ways to generate power without being dependent on the willingness of other nations to provide petroleum.

The windmill may be a solution to all three of those crises.  Once installed, it is easy and economical to maintain, and in the right situation can provide power for years as cheaply as the wind blows.

You should be aware, however, that the success of a windmill installation requires two physical requirements.  First, the windmill should be installed on a piece of land at least an acre in size.  Without that much space, it is unlikely that the windmill will be able to capture enough wind power for the windmill to work.  Buildings located too near to a windmill blocks the wind and diminishes its likelihood of successful operation.  And second, the wind in the area should maintain a constant speed of at least 11 miles per hour.  Otherwise, the blades of the windmill will not rotate with sufficient speed to generate electricity.

A windmill is made of the following components:

Ready-to-install windmill kits are available online and in some home stores.  Since it is essential for any windmill to suit the space available and for all components to be appropriately sized to work together.  Consult an expert for advice in these matters.

To learn more about installing residential wind turbines, visit Earth4Energy.

~ ~ ~ ~ ~

To read more about powering your home with alternative energy, read:

• How To Use Renewable Energy At Home | Go Solar Power For Homes – Using renewable energy will save you thousands of dollars and assist in keeping the world green. Some people suppose that the so-called expensive.

• Excellent Advice How To Use Renewable Energy At Home – Using renewable energy will save you a lot of money and assist in keeping the world green. Some people suppose that the so-called “expensive” fee of installing renewable energy is too dangerous in case the energy fails. …

Windmills are cropping up everywhere on the landscape.  Here in the midwest, where there are lots of big, open, flat spaces, it is becoming more and more common to see windmill farms when traveling on the road.  A windmill farm is usually a patch of a more conventional farm that has windmills erected on it.  Usually, the windmills are placed there by energy companies under an agreement with the farm owner.  The windmill electricity generated by the windmills is owned by the energy company and the farmer is compensated for the company’s use of the land.

You can see windmills in other places, too.  A single wind turbine may provide windmill electricity for a farm house or other residence on a large piece of land.  There are even experiments with wind turbines on top of apartment buildings in urban environments.

Installing a windmill may have a considerable upfront cost but after a successful installation it saves money for the rest of its useful life.  There are certain ideal conditions, of course, and the installation of the windmill must be completed correctly.

If the initial cost of installing the windmill is a deterrent to converting to windmill electricity, a homeowner can turn it into a do-it-yourself project.  Of course, there are certain important considerations to take into account before attempting a project like that. 

First, a DIY windmill requires a good, clear and detailed plan.  It should take into consideration the output of windmill electricity that is desired.

Secondly, use sturdy components.  It may be stating the obvious, but keep in mind that the windmill will be withstanding high winds.  The components must be strong enough to stand up to the wind.  That is not to say that the components need to be new, however.  DIY’ers have successfully built and operated windmills with sturdy used components.

Thirdly, educate yourself about what is available on the market.  Always take into consideration the amount of output desired, the physical site in question and the budget.

If you are ready to proceed, you should take the following tips into consideration when you are choosing your windmill plans:

• Make sure the plans have clear, detailed illustrations.  Your plans should be detailed with respect to each component used in the windmill.  You should have both illustrative and textual descriptions of each component and advice about choice of components taking your site into consideration.
  
• Make sure the plans are written in reader-friendly language.  You don’t have to be an engineer to install a windmill.  But if you aren’t an engineer, you need plans that are written for lay people.
• The guide should provide information concerning where and how to find components in your area.
  

Windmill electricity is not an appropriate choice for every site.  And installing a windmill as a do-it-yourself project may not be the best choice for everyone.  But under the right circumstances, it can be a great money-saving idea.  If you are interested in learning more about windmill electricity and building home wind turbines as a do-it-yourself project, be sure to visit Earth4Energy.

To read more about residential wind turbines, take a look at these stories:

• Urban Wind Turbine: A Rare Species Spotted – Ask a die-hard altpower fan if they’ve ever seen a functional wind turbine in the urban jungle, and chances are, …

• What You Never Knew About Home Wind Turbine Design | Living Life … – Back in the day if you thought about a home wind turbine, what would have come to mind is a large tower with enormous white blades spinning rather slowly. But, with the development in technology and the need for more and more people to …

At the age of 14, William Kamkwamba built a windmill in his village in Malawi.  In doing so, he brought electricity to the village.  Watch his interview with Jon Stewart of the Daily Show.  If he can do it, you can, too!

To learn more about windmill electricity, read:

• Windmill electricity ?Basic Parts of a Wind Turbine – Not all of us windmill electricity enthusiasts are mechanics and have a full understanding of how machines work. I still think it might be some sort of magic when I look up and see planes flying in the sky. For those of us that are not technical here is a list of the basic parts of a windmill or wind turbine.

• The Benefits Of Making Electricity From The Wind – Electricity generated from windmills is called windmill electricity. Windmill electricity is a very cheap source of energy in terms of generation of power. But that’s only once the windmill is installed. Most people know that wind …

Read more about self-sufficient living here:

• Magazines (and Websites) About Homesteading and Self-Sufficiency … – The magazine was filled with stories about self-sufficient country living, the sort of thing my dad aspired to. I’d read the magazine after he was finished, but never really understood the appeal of building your own greenhouse or …

• DESIGN AND MAKE A HOMESTEADER’ S KNIFE – But in the day-to-day routine of self-sufficient country living, edged blades are almost as essential today as they were back when ships were powered by the wind, plows and wagons were pulled by horses, and before food came …